Marantz Updating to the UD9004’s Latest Software Version, Connecting to the Network, Router

ENGLISH

5. Updating to the UD9004’s Latest Software Version

Getting

Connecting to the Network

•You can update by downloading the latest

For more information, on the GUI menu, select “Other Setup” – “Firmware Update” (vpage 33).

•See “Network Setup” (vpage 31) on the GUI menu for more information on network setting.

Internet

Computer

Modem	LAN port/
	Ethernet
	connector
Router	To WAN port

To LAN port

To LAN port

NETWORK connector

System Requirement

nInternet Connection by Broadband Circuit

nModem

Device that connects to the broadband circuit and conducts communications on the Internet. A type that is integrated with a router is also available.

nRouter

When using the UD9004, we recommend a router with the following features.

•Built-in DHCP (Dynamic Host Conrotocol) server.

Function that automatically assigns an IP address on the LAN.

•Built-in 100BASE-TX switch (built-in switching hub compatible with speeds upwards of 100 Mbps)

nEthernet cable (CAT-5 or greater recommended)

•An Ethernet cable is not included with the UD9004.

•For Ethernet cable, we recommend you use shielded straight cable (normal type). If you use the shielded cable, the noise may adversely affect other devices.

For Internet connection, use an ISP (Internet Service Provider). Ask your local dealer for details.

NOTE

•It is necessary to subscribe to an ISP in order to connect to the Internet. If you already have a broadband connection, there is no need to subscribe anew.

•The router you can use varies with the ISP. For more information, contact your ISP or PC dealer.

•MARANTZ assumes no responsibility whatsoever for any communication errors or troubles resulting from customer's network environment or connected devices.

nOthers

•The UD9004 can use the DHCP function to automatically set the network.

•With the type of circuit in which network setting is performed manually, when subscribed to a provider, conduct the setting in accordance with “Network Setup” on the GUI menu (vpage 31).

•If you connect the UD9004 to a network without a DHCP function, conduct IP address and other settings according to “Network Setup” on the GUI menu (vpage 31).

•The UD9004 does not support PPPoE. If you subscribe to a circuit that is set with PPPoE, a PPPoE- compatible router is required.

•When setting manually, check the setting contents with the network administrator.

Started Connections Setup Playback HDMI Control Function Information Troubleshooting Speci

21