Marantz UD9004 manual For speci, Playable, Rating level has been

Getting Started Connections Setup Playback HDMI Control Function Information Troubleshooting Speci

ENGLISH

	Symptom				Cause / Countermeasure	Page
No return to start-up					• There may be an internal error. Set the power to standby, wait	–
screen when disc is					awhile, then turn the power back on.
removed.
The	set	cannot		be	• Aim the remote control directly at infrared sensor window on the	7
operated		with		the	front of the unit.
remote control unit.					• Operate within a distance of 7 meters from the remote control	7
					sensor.
					• Remove the obstacle.	–
					• Replace the batteries with new ones.	7
					• Insert the batteries in the proper direction, checking the q and	7
					w marks.
					• Make the signal code of the remote control match to the signal	7
					code of the unit.
Buttons do not work					• Operations may not be permitted by the disc.	–
or	the	unit	stops		• The safety protection device may be activated. Unplug the power	–
responding.					cord once, and wait for 5-10 seconds and then plug it in again.
					• Refer to the instructions of the disc.
						–
Playable		disc	is	not	• The pickup lens may be dirty. Before requesting servicing, try	–
read.					cleaning the laser pickup with a commercially available lens
					cleaner. (Do not use a cleaner with brush because it may damage
					the lens.)
Angle		does		not	• If a BD-Video or DVD-Video does not record multiple angles,	49
switch.					angle cannot be switched. Also, multiple angles may be recorded
					for speci
Playback		does		not	• Playback may be prohibited by the viewing restriction setting.	31
start when the title is					Check the “Ratings” setting on the GUI menu.
selected.
The	password			for	• On the GUI menu, perform the “Other Setup” – “Initialize”	33
rating level has been					procedure.
forgotten.

•Some function may not be used in some operation status and this is not failure of the unit. Read the description in this Owner’s Manual for details on correct operations.

•The volume may differ from disc to disc. This is due to the differences in how the signals are recorded on the disc, and is not a malfunction.

•During programmed playback, it is not possible to perform random playback or to start playback from the desired track or

•Some functions are prohibited on some discs.

56