Marantz UD9004 manual Playing Back 2-Channel Audio, Recording a CD, Stereo, MD Recorder

Getting Started Connections Setup Playback HDMI Control Function Information Troubleshooting Speci

ENGLISH

3. Playing Back 2-Channel Audio

Connecting to a Device with Analog 2-channel Audio Input Terminal with Balanced Cable

Select “Audio Setup” – “XLR” (vpage 30) from the GUI menu beforehand to match the device to be connected.

Stereo

AUDIO

AUDIO

IN

L

R

NOTE

•Do not short circuit between each terminals. When making connections, check the input terminal layout of the device to be connected with the owner's manual.

•The default UD9004 balance model XLR input connectors pin alignment is as shown.

q GROUND w HOT e COLD

For software recorded in multi-channel, analog signals that have been down-mixed into 2 channels are output.

Connecting to a Device with Analog 2-channel Audio Input Terminal with Stereo Pin Plug Cable

On the GUI menu, select “Audio Setup” – “7.1ch Audio Out”, and set it to “2 channel” (vpage 27).

Stereo

AUDIO

AUDIO

IN

L	L	L
R	R	R

4. Recording a CD

Connecting to a Digital Recording Device

MD Recorder

AUDIO

COAXIAL

IN

OPTICAL

IN

When converting multi-channel audio to 2-channel for output, on the GUI menu, select “Audio Setup”

–“Digital Out”, and set it to “PCM Down Sampling” (vpage 29). If you play back DVD or other media with incorrect coner.

For software recorded in multi-channel, analog signals that have been down-mixed into 2 channels are output.

20