![](/images/new-backgrounds/1129943/12994365x1.webp)
Getting
ENGLISH
Audio Setup
Setting items | Setting contents |
Pure Direct Setup | Default settings are underlined. |
Makes settings regarding digital audio and video output modes during Pure Direct mode,
Started
XLR
Set the signal to be output from the XLR terminal.
GTerminal PolarityH : Set the polarity of the XLR terminal.
•Normal : Normal polarity.
•Inversion : Reverse the polarity.
as well as display messages. Two types of setting can be registered.
Setting items | Setting contents |
Connections Setup Playback
GGain UpH : Can increase output gain when the input sensitivity of a device connected via XLR is low.
•Off : Outputs at standard gain from the XLR terminal.
•On : Increase the output gain of the XLR terminal. Set when the input sensitity of the connected device is low.
The default UD9004 balance model XLR audio connectors pin alignment is as shown.
User Preset 1/
User Preset 2
This sets the operating mode for “User Preset 1” or “User Preset 2” selected by PURE DIRECT button.
Setting each of these items to “Off” enables output of high quality analog signals
GDigital OutH : Set whether to output signals to the digital audio output terminal.
•On : Enable digital audio output.
•Off : Disable digital audio output.
GVideo OutH : Set option of video output.
•On : Enable video output.
•Off : Disable video output. This setting also disables audio output from the HDMI terminal.
GDisplayH : Set option for front panel display.
HDMI Control Function Information Troubleshooting Speci
q GROUND w HOT e COLD
free of interference from the associated circuits.
•On : Turn on display.
•Off : Turn off display.
For more information, see “Playing Back
30
Remote control operation | SET UP | :Displaying the menu | d f 0 1 | :Moves the cursor | ENTER :Decision the setting | RETURN :Return to previous menu |
buttons |
| Cancel the menu |
| (Up/Down/Left/Right) |
|
|