Marantz UD9004 Playing Back with a Direct Connection to a TV, Input terminal Terminal, Supplied

2. Playing Back with a Direct Connection to a TV

Check the television’s audio and video terminals and make the connection to one of them.

Audio terminals		Video terminal	S video input Component video		HDMI input
			terminal	input terminal	terminal
TV		TV	TV	TV	TV
AUDIO		VIDEO	VIDEO	VIDEO
AUDIO		VIDEO	S VIDEO	COMPONENT VIDEO	HDMI
	IN	IN	IN	IN	IN
R	L			Y PB PR
R	L
(supplied)		(supplied)	(Sold	(Sold	(Sold
			separately)	separately)	separately)
R	L

When outputting the UD9004’s analog 2-channel audio to the television’s 2-channel (stereo) audio input terminal, on the GUI menu, select “Audio Setup” – “7.1ch Audio Out”, and set it to “2 Channel” (vpage 27).

NOTE

Do not connect the UD9004’s video output via a VCR (Video Cassette Recorder). Some media contain copy prohibit signals, which will disturb the screen image.

When playing NTSC disc, UD9004’s video output becomes NTSC signal format. When playing PAL disc, UD9004’s video output becomes PAL signal format.

ENGLISH

nWhen connected to the television’s component video input terminal

•The UD9004’s component video output supports 480i/576i/480p/576p/720p/1080i output. Match the output to the corresponding resolution of the connected television by setting, on the GUI menu: “Video Setup” – “Component Resolution” (vpage 26). Images will not be projected normally if the television resolution and UD9004’s output resolution do not match. Copyright protected DVD is output in 480i/576i or 480p/576p.

nWhen connected to the HDMI input terminal

Outputting both digital video and digital audio signals.

See “Required Settings for HDMI Connection” (vpage 15) for HDMI video output and audio output settings.

Getting Started Connections Setup Playback HDMI Control Function Information Troubleshooting Speci

19