Setting Up Your Monitor, Connecting the Cables | HP P1130 P4819A

NOTE

HP 21” Color Monitor User’s Guide

Setting Up Your Monitor

Setting Up Your Monitor

Where to Place the Monitor

Place your monitor on a flat sturdy surface. Ensure the operating site is free from excessive heat, moisture, and sources of electromagnetic fields. Sources of electromagnetic fields include transformers, motors and other monitors.

Connecting the Cables

1Before you connect any cables, refer to the safety instructions at the beginning of this manual. Make sure your computer and monitor are switched off.

2Connect the video input cable (it has a 15-pin plug) to one of the video outlets on your computer. You can use both outlets to connect two computers.

3Tighten the thumbscrews on the plug.

4Connect the power cord to the monitor.

5Plug the power cord into the power outlet.

Video Cables

Video Cable

Power Cords

The location of your computer's video cable connector may be different to the one shown. Refer to the manual that came with your computer, if necessary.

6English

Image 7

HP P1130 P4819A manual Setting Up Your Monitor, Where to Place the Monitor, Connecting the Cables

Contents

Hp 21-inch color Monitor P4819a Inch Color Monitor HP 21 Color Monitor User’s Guide Important Safety Instructions Minimizing Energy Consumption Minimizing Eye Strain What Your New Monitor Offers Where to Place the Monitor Setting Up Your MonitorConnecting the Cables Windows How To Install The DriversWindows XP Windows 95 or Windows # Adjustment Button Using Your MonitorPower Switch Adjustment Button + Brightness and Scroll Up Button Input SwitchContrast and Scroll Down Button To display the Menu Using the On-Screen MenuTo select the menu you want to adjust To adjust the menu Selecting the On-Screen Menu Language To reset to EnglishTo select a language of your choice Displaying the Current Input Signal Selecting the Input Signal Navigating the menu OSD and changes the menu’s Customizing Your Monitor Adjusting the brightness and contrast Automatically sizing and centering the picture Auto Adjusting the picture SIZE/CENTERAdjusting the size of the picture SIZE/CENTER Adjusting the centering of the picture SIZE/CENTER Select To Adjusting the shape of the picture Geometry SelectTo Adjusting the convergence Convergence Select Adjusting the quality of the picture Screen Example of moire Selecting the color mode Adjusting the color of the picture ColorPreset mode Expert mode Variable mode Restoring the color from the Easy or sRGB menus SRGB mode Mode green power indicator on for at least 30 minutes. If Changing the menu position Additional settings OptionTo cancel the control lock Degaussing the screen Resetting all of the adjustment data for all input signals Resetting the adjustments Supported Video Modes Resolution Refresh Rate/HzFactory Optimized Modes On-screen messages TroubleshootingIf thin lines appear on your screen damper wires If no Input Signal appears on the screen If OUT of Scan Range appears on the screen Picture is not centered No picture and LED is offNo picture and LED is on Colors are not pure 370 MHz Technical Specifications Environmental Information Care and Cleaning General Hardware WarrantyWarranty repair or replacement Model Service Provided Limitation of Warranty Proof of Purchase and Warranty PeriodLimitation of Liability and Remedies Part II Year 2001 Warranty Declaration of Conformity Regulatory Information Ray Radiation Notice Hinweis für Deutschland Geräuschemission TCO CFCs freons