EURORACK MX802A
Phantom power (+48 V DC) is provided. This can be switched on or off by the +48 V phantom switch .
Care should be taken NOT to plug mics into the console (or stagebox) while the phantom power is on. Also, mute the monitor/PA speakers when turning phantom power on or off. Allow the system to adjust for a couple of seconds after engaging phantom power before setting input gains.
If possible, connect the unit to other devices in a balanced configuration to allow for maximum interference immunity.
Unbalanced use of mono 1/4" jack plugs
Tip =
Signal
Sleeve =
Ground / Shield
Tip
Sleeve
Strain relief clamp
Balanced use of stereo 1/4" jack plugs
Tip = hot (+ve)
Ring = cold
Sleeve =
Ground / Shield
Tip
Ring
Sleeve
Strain relief clamp
For connection of balanced and unbalanced plugs, ring and sleeve have to be bridged at the stereo plug.
| Balanced use with XLR connectors |
|
| ||
2 | 1 | 1 | = Ground / Shield | 1 | 2 |
|
| 2 | = hot (+ve) |
|
|
|
| 3 | = cold |
|
|
3 | 3 |
Input | Output |
For unbalanced use pin 1 and pin 3 have to be bridged |
|
Fig. 6.3: Different plug types
6. CONNECTIONS | 13 |