ULTRALINK PRO MX882
6.2 Application as a splitter
Fig. 6.2: Block diagram of the SPLITTER function
A splitter is a distribution amplifier which allows for splitting a specific input signal to several outputs. This function is of use, e.g., in a
In this mode, the output signal from the mixer is applied to the main inputs of the BEHRINGER ULTRALINK PRO. If the SPLIT/MIX switches are set to “SPLIT”, the mono outputs of the respective channels provide either the left or the right main signal. Depending on the setting of the BALANCE control, any balance between left and right main signal can be adjusted.
At the same time, the main input signal is also sent to the left or right main output, so that here two additional splitter outputs are available. Please note that these outputs do not feature a balance routing function. The left main input is routed exclusively to the left main output; similarly, the right main input feeds the right main output only.
6.2.1 The ULTRALINK PRO as a
For this special application, the splitter function configures the unit as a
6. APPLICATIONS | 13 |