Dual mono operation | Behringer PMH3000, PMH1000, PMH5000 instruction

EUROPOWER PMH1000/PMH3000/PMH5000

Fig. 5.3: Dual mono operation

For a dual mono operation, the AMP MODE switch must be set to its center position (MON1/MONO for PMH3000/PMH5000 or MON for PMH1000)! The two loudspeaker outputs provide the main and the monitor signals, separately from each another. Each of these signals is then sent to two speakers wired in parallel.

Fig. 5.4: Standard set-up (example)

The illustration shows just one channel configuration possible, comprising mono and stereo sources and additionally the tape input/output for recording the mix signal or feeding in a playback signal.

5. WIRING EXAMPLES

11

Image 11

Behringer PMH3000, PMH1000, PMH5000 user manual Dual mono operation

Contents

Europower PMH1000/PMH3000/PMH5000 Important Safety Instructions Europower PMH1000/PMH3000/PMH5000 Foreword Table of Contents Manual IntroductionControl Elements Before you get started Present at the FX Send jack see Input section Main and monitor section Equalizer and FBQEffects section Rear panel ConnectorsDigital Effects Processor Audio connections InstallationMains connection Loudspeaker connections 1/4 TS connector Speakon pin assignment Wiring Examples Dual mono operation Expanded set-up Microphone Inputs Specifications § 1 Warranty CARD/ONLINE Registration § 2 Warranty Warranty