Behringer PMP2000 6.Specifications, Loudspeaker Connections, Noise, Microphone inputs, Peak Power, both channels driven, RMS @ 1 % THD (sine wave), bridged mode:

11EUROPOWER PMP2000 User Manual

6.Specifications

Mono inputs

Microphone inputs

		Type	XLR, electronically balanced,
			discrete input circuit
	Mic E.I.N. (20 Hz - 20 kHz)
		@ 0 Ω source resistance	-122 dB / 125 dB A-weighted
		@ 50 Ω source resistance	-122 dB / 125 dB A-weighted
		@ 150 Ω source resistance	-121 dB / 124 dB A-weighted
		Frequency response	<10 Hz - 100 kHz (-1 dB),
			<10 Hz - >200 kHz (-3 dB)
		Gain	+33 dB, +8 dB with pad
		Max. input level	+12 dBu @ +8 dB gain
		Impedance	approx. 2.2 kΩ balanced / 1.1 kΩ unbalanced
		Signal-to-noise ratio	110 dB / 114 dB A-weighted
			(-11 dBu In @ +33 dB gain)
		Distortion (THD + N)	0.001% / 0.0008% A-weighted
Mono Line Inputs
		Type	¼" TRS connector, balanced
		Impedance	approx. 80 kΩ balanced, 40 kΩ unbalanced
		Max. input level	30 dBu
Stereo Line Inputs
		Type	¼" TRS connector, unbalanced
		Impedance	approx. 40 kΩ unbalanced
		Max. input level	+28 dBu
EQ
		Low	60 Hz / ±15 dB
		Mid	700 Hz/ ±15 dB
		High	6 kHz / ±15 dB
Preamp Outputs Left/Mono & Right
		Type	¼" TRS connector, unbalanced
		Impedance	approx. 1.5 kΩ
		Max. output level	+21 dBu
Power Amp Inputs
		Type	¼" TRS connector, unbalanced
		Impedance	approx. 47 kΩ
		Max. input level	+21 dBu

Monitor Output
		Type	¼" TRS connector, unbalanced
		Impedance	1.5 kΩ
		Max. output level	+21 dBu
		DSP	24-bit Texas Instruments
		Converter	24-bit Sigma-Delta,
			64/128-times oversampling
		Sampling rate	40 kHz
Main Mix System Data1
	Noise
		Main mix @ -∞,	-76 dB / -80 dB A-weighted
		Channel fader -∞
		Main mix @ 0 dB,	-72 dB / -76 dB A-weighted
		Channel fader -∞
		Main Mix @ 0 dB,	-71 dB / -75 dB A-weighted
		Channel fader @ 0 dB

Power Amp Specifications

RMS @ 1 % THD (sine wave), both channels driven:

8 Ω per channel	165 W
4 Ω per channel	250 W

RMS @ 1 % THD (sine wave), bridged mode:

	8	Ω	500 W
Peak Power, both channels driven
	8	Ω per channel	225 W
	4	Ω per channel	350 W
Peak Power, bridged mode
	8	Ω	800 W
Loudspeaker Connections
	Loudspeaker connector		Professional speaker connectors­
			(compatible to Neutrik Speakon)
Load Impedance
	Left/monitor		4/8/16 Ω
	Right/mono main		4/8/16 Ω
	Bridge		8/16 Ω

behringer.com