TUBE CONDENSER MICROPHONE T‑47
a bathtub, washing machine, swimming pool,etc.). When doing voice recordings, always use the enclosed windscreen to protect the capsule from moisture.
PSU‑T power supply:
To reduce the risk of electric shock, do not remove the top cover (or the rear section). No user serviceable parts inside.
Do not defeat the safety purpose of the polarized or
Service and care:
After each use, wipe the microphone down with a soft cloth and place it back into its protective casing (included with the microphone).
3. Control elements and connections
3.1 Microphone
You can tell that the T‑47 is switched on when the small window glows red.
There is an XLR connector on the bottom end of the microphone. Connect it to the power supply (PSU‑T).
3.2 Power supply
The included BEHRINGER PSU‑T not only provides the supply voltage for the tube preamplifier but also employs a circuit that reduces the low frequency response. This is activated on the front panel with the LOW CUT switch.
Control elements and connections | 3 |