TRUTH B2092A
1.1 Before you get started
1.1.1 Shipment
Your B2092A was carefully packed in the factory to guarantee safe transport. Nevertheless, we recommend that you carefully examine the packaging and its contents for any signs of physical damage that may have occurred during transit.
+If the unit is damaged, please do NOT return it to us; instead, notify your dealer and the shipping company immediately, otherwise claims for damage or replacement may not be granted.
+To assure optimal protection of your B2092A during use or transport, we recommend utilizing a carrying case.
+Please always use the original packaging to avoid damage due to storage or shipping.
+Never let unsupervised children play with the B2092A or with its packaging.
+Please dispose of all packaging materials in an environmentally friendly fashion.
1.1.2 Initial operation
Please make sure the unit is provided with sufficient ventilation, and never place the B2092A on top of an amplifier or in the vicinity of a heater to avoid the risk of overheating.
+Before plugging the unit into a power socket, please make sure you have selected the correct voltage!
The fuse compartment near the power plug socket contains three triangular markings. Two of these triangles are opposite one another. The voltage indicated adjacent to these markings is the voltage to which your unit has been set up, and can be altered by rotating the fuse compartment by 180°. ATTENTION: This does not apply to export models that were manufactured only for use with 120 V, for example!
+If you alter the unit’s voltage, you must change the fuse accordingly. The correct value of the fuse needed can be found in the chapter “SPECIFICATIONS.”
+Faulty fuses must be replaced with fuses of appropriate rating without exception! The correct value of the fuses needed can be found in the chapter “SPECIFICATIONS.”
Power is delivered via the cable enclosed with the unit. All required safety precautions have been adhered to.
+Please make sure that all units have a proper ground connection. For your own safety, never remove or disable the ground conductor from the unit or on the AC power cord. The unit should always be connected to a mains socket outlet with a protective earthing connection.
+When installing the product, ensure the appliance coupler or power cord is easily accessible for disconnecting the unit from mains.
1.1.3 Online registration
Please do remember to register your new BEHRINGER equipment right after your purchase by visiting www.behringer.com (alternatively www.behringer.de) and kindly read the terms and conditions of our warranty carefully.
Should your BEHRINGER product malfunction, our goal is to have it repaired as quickly as possible. To arrange for warranty service, please contact the retailer from whom the equipment was purchased. Should your BEHRINGER dealer not be located in your vicinity, you may directly contact one of our subsidiaries. Corresponding contact information is included in the original equipment packaging (Global Contact Information/European Contact Information). Should your country not be listed, please contact the distributor nearest you. A list of distributors can be found in the support area of our website (www.behringer.com).
Registering your purchase and equipment with us helps us process your repair claims quicker and more efficiently.
Thank you for your cooperation!
2.CONTROL ELEMENTS AND CONNECTIONS
Fig. 2.1: Control elements in the back
The LIMIT LED lights up as soon as one of the
POWER. This LED indicates that the loudspeaker is turned on.
Use the PHASE switch to to modify the B2092A’s phasing
ROOM COMPENSATION (function for compensating for different room characteristics). Using this switch, you can optimize your B2092A for each installation location (ch. 3.3.1).
Use the INPUT TRIM control to adjust the input sensitivity.
2. CONTROL ELEMENTS AND CONNECTIONS | 5 |
