U-PHONO UFO202 User Manual

•Set your recording program on your computer to RECORD, and begin playing the start of the tape or record immediately after.

•Let the audio play all the way through the first side. Once the music stops, press STOP on the recording program.

•Flip the tape or record over and repeat the recording process.

•Once both sides are recorded, you may edit the file to cut out any extra time before or after the audio was captured. You may also cut the long track into individual songs and save the files separately. This process differs slightly depending on what program you are using, so refer to the software manual for editing procedures.

•You can play back your stereo recorded audio through the UFO202 RCA outputs and PHONES output. You may want to apply equalization or other processing if your software application is so equipped.

•If you plan to burn these files to a CD for use in a home stereo or car, save the audio in WAV format.

Audio Connections

Although there are various ways to integrate the UFO202 into your studio or live set-up, the audio connections to be made will basically be the same in all cases:

Wiring

Please use standard RCA cables to connect the UFO202 to other equipment:

tip

 

tip

sleeve

shield

sleeve

 

 

You can also use a ¼" adapter cable:

Sleeve

Sleeve

Tip

Tip

Headphones connection

The UFO202 is provided with a headphones jack. Here, you can connect any standard pair of stereo headphones with a ⅛" TRS connector.

5

Specifications

LINEIN

 

Connectors

RCA, unbalanced

 

Input impedance

approx. 27 kΩ

 

Max. input level

2 dBV

LINEOUT

 

 

Connectors

RCA, unbalanced

 

Output impedance

approx. 400 Ω

 

Max. output level

2 dBV

DIGITALOUTPUT

 

 

Socket

Toslink, optical cable

 

Output format

S/PDIF

PHONESOUT

 

 

Socket

1⁄8"TRS stereo jack

 

Output impedance

approx. 50 Ω

 

Max. output level

-2 dBu, 2 x 3,7 mW @ 100 Ω

USB1.1

 

 

Connectors

type A

DIGITALPROCESSING

 

 

Converter

16-bit converter

 

Sample rate

32.0 kHz, 44.1 kHz, 48.0 kHz

SYSTEMDATA

 

 

Frequency response

10 Hz to 20 kHz, ± 1 dB @ 44.1 kHz sample rate

 

 

10 Hz to 22 kHz, ± 1 dB @ 48.0 kHz sample rate

 

THD

0.05 % typ. @ -10 dBV, 1kHz

 

Crosstalk

-77 dB @ 0 dBV, 1 kHz

 

Signal-to-noise ratio

A/D 89 dB typ. @ 1 kHz, A-weighted

 

 

D/A 96 dB typ. @ 1 kHz, A-weighted

POWERSUPPLY

 

 

USB connection

5V , 100 mA max.

DIMENSIONS/WEIGHT

 

 

Dimensions (H xW x D)

approx. 22 mm (0.87") x 88 mm (3.46") x

 

 

60 mm (2.36")

 

Weight

approx. 0.12 kg

BEHRINGER always takes great care to ensure the highest standard of quality. Any modifications which may be necessary will be made without prior notification.Technical data and appearance of the equipment can therefore differ from the details or illustrations shown.

ENGLISH