ENGLISH

8

3. Installation

3.1 Audio connections

for various applications, you will need a number of different cables. The following illustrations show how these cables are to be connected. Always make sure to use high-grade cables.

◊Be sure that installation and operation of your VMX1000USB are performed only by qualified personnel. During as well as after installation, sufficient grounding of both your equipment and persons handling it must be assured. Otherwise, electrostatic discharge may lead to undesirable operation or permanent damage.

input

21

3

1 = ground/shield2 = hot (+ve)3 = cold (-ve)output

12

3

For unbalanced use, pin 1 and pin 3 have to be bridged

Balanced use with XLR connectorsFig. 3.1: XLR connectionsStrain relief clampSleeveTip

Sleeve

(ground/shield)

Tip

(signal)Unbalanced ¼" TS connectorFig. 3.2: ¼" TS connector

PRO MIXER VMX1000USB User Manual

strain relief clampsleeve ring tip

sleeve

ground/shieldringcold (-ve)tiphot (+ve)

For connection of balanced and unbalanced plugs, ring and sleeve have to be bridged at the stereo plug.

Balanced 1/4" TRS connectorFig. 3.3: ¼"TRS connector

strain relief clamp

sleeve ring tip

sleeve

ground/shield

ring

right signal

tip

left signal1/4" TRS headphones connectorFig. 3.4: ¼" TRS headphone connector

tip

 

tip

sleeve

shield

sleeve

 

 

Fig. 3.5: RCA cable