Beko BK 7671 LD PLUS manual Temperature control and adjustment, Before operating, And note that

GB Instructions for use

Temperature control and adjustment

Operating temperatures are controlled by the thermostat knob (Fig. 2) and may be set between 1 and 5, the coldest position. When the appliance is switched on for the first time, the thermostat should be adjusted so that, after 24 hours, the average fridge temperature is no higher than +5°C (+41°F ).

We recommend setting the thermostat half-way between the 1 and 5 setting and monitoring to obtain the desired temperature i. e. towards 5 you will obtain a lower temperature and vice versa. Some sections of the fridge may be cooler or warmer ( such as the salad crisper and the top part of the cabinet ) which is quite normal.

In ambient temperatures above 25°C (77°F), especially in summer, turn the thermostat knob towards 5. In ambient temperatures below 25°C (77°F) turn the thermostat knob to a half way position.

Frequent door opening causes internal temperatures to rise, so it is advisable to close as soon as possible after use.

Before operating

Final Check

Before you start using the appliance check that:

1.The feet have been adjusted for perfect levelling.

2.The interior is dry and air can circulate freely at the rear.

3.The interior is clean as recommended under "Cleaning and care.”

4.The plug has been inserted into the wall socket and the electricity is switched on. When the door is open the interior light will come on.

And note that:

5.You will hear a noise as the compressor starts up. The liquid and gases sealed within the refrigeration system may also make some (noise), whether the compressor is running or not. This is quite normal.

6.We recommend setting the thermostat knob midway and monitor the temperature to ensure the appliance maintains desired storage temperatures (See section Temperature Control and Adjustment).

7.Do not load the appliance immediately it is switched on. Wait until the correct storage temperature has been reached. We recommend checking the temperature with an accurate thermometer (see; Temperature Control and Adjustment).

4