Beko BK 9550 NF Replacing the interior light bulb, Cleaning and care, Sliding storage boxes Fig

GB Instructions for use

Sliding storage boxes (Fig. 10)

This accessory is designed to use the door shelves’ volume more efficiently. It’s property of moving right or left helps to easily settle high bottles to the lower shelf.

Temperature adjustable compartments (Fig. 6)

These compartments are designed for optional usage. You can either use these compartments for zero temperature compartment or for second floor crisper when you need extra volume for your vegetables.

Attention! You can extend your fridge’s volume by removing the left-side second floor crisper. To do this, pull the crisper and the crisper will stop because it will reach the stopper. Raise the front part of the crisper 1 cm., repull the crisper and it will be removed easily. The right- side second floor crisper can be moved right and left by the help of its sliding mechanism. So you can move this compartment according to the volume of the pots in the fridge.

Replacing the interior light bulb

Should the light fail, switch off at the socket outlet and pull out the mains plug.

Then ensure the bulb is screwed securely in the bulb holder. Replace the plug and switch on.

If the light still fails, obtain a replacement E14 screw-cap type 15 Watt (Max) bulb from your local electrical store and then fit it.

Carefully dispose of the burnt-out light bulb immediately.

Cleaning and care

1.We recommend that you switch off the appliance at the socket outlet and pull out the mains plug before cleaning.

2.Never use any sharp instruments or abrasive substances, soap, household cleaner, detergent or wax polish for cleaning.

3.Use lukewarm water to clean the cabinet of the appliance and wipe it dry.

4.Use a damp cloth wrung out in a solution of one teaspoon of bicarbonate of soda to one pint of water to clean the interior and wipe it dry.

5.Make sure that no water enters the temperature control box.

6.If the appliance is not going to be used for a long period of time, switch it off, remove all food, clean it and leave the door ajar.

7.We recommend that you polish the metal parts of the product (i.e. door exterior, cabinet sides) with a silicone wax (car polish) to protect the high quality paint finish.

8.Check door seals regularly to ensure they are clean and free from food particles.

9.Never:

•Clean the appliance with unsuitable material; e.g. petroleum based products.

•Subject it to high temperatures in any way,

•Scour, rub etc., with abrasive material.

10.Removal of dairy cover and door tray :

•To remove the dairy cover, first lift the cover up by about an inch and pull it off from the side where there is an opening on the cover.

•To remove a door tray, remove all the contents and then simply push the door tray upwards from the base.

11. Make sure that the special plastic tray at the bottom of the appliance which collects defrost water is clean at all times. If you want to remove the tray to clean it, follow the instructions below:

•Take out the ventilation cover that is located at the bottom of the appliance by pulling it toward yourself.

•Pull out the plastic tray at the bottom.

•Put this tray in its place after cleaning it with soapy water.

•Insert the bottom ventilation cover in its place by pressing.

Note: Never use gasoline or similar materials for cleaning purposes.

6