IMPORTANT
INSTALLATION INSTRUCTIONS
1.To avoid a hazard due to instability of the appliance, it must be fixed in accordance with the instructions.
2.Do not operate this appliance unless installed to furniture.
3.The appliance should be located on a smooth surface. The four front and back feet can be adjusted as required. To ensure that, your appliance is standing upright adjust the four front and back feet by turning clockwise or
4.Refer to «Cleaning and Care» section to prepare your appliance for use.
To avoid any loss in performance, air channels should not be obstructed.
Minimum distance between the wall and the appliance must be at least 10 mm.
5.The appliance must be protected against rain, moisture and other atmospheric influences. IMPORTANT: Care must be taken“ while cleaning / carrying the appliance to avoid touching the bottom of the condenser metal wires at the back of theappliance as you might injure your fingers and hands
IMPORTANT: This appliance is not designed for stacking with any other appliance.When positioning your appliance, take care not to damage your flooring, pipes,wall coverings etc.
9
EN
