Water Tank Capacity 
2.2 Litres
Water dispenser
Water dispenser is a very useful feature to obtain chilled water without opening the door of your fridge. Since you do not have to open the door of your fridge frequently, you also save on electricity.
Using the water dispenser
Push in the lever of the water dispenser with your glass. By releasing the lever, you cut off the dispensing. When operating the water dispenser, maximum flow is achieved by fully depressing the lever. Please note, how much water flows from the dispenser depends on how far you depress the lever. As the level of water in your cup / glass rises, gently reduce the amount of pressure on the lever to avoid overflow. If you depress the lever a small amount, then water will trickle; this is perfectly normal and is not a fault.
Filling the water tank
Open the cap of the water tank as illustrated in the figure. Fill in with pure and clean drinking water. Close the cap. To avoid accidental water dispensing, we recommend you to lock the water dispenser. [See Page 8]
Caution!
• Do not fill water tank with any liquid other than drinking water; beverages such as fruit juice, carbonated fizzy soda drinks, alcoholic drinks are not suitable for use with water dispenser. If such liquids are used, the water dispenser will malfunction and may be damaged beyond repair. The guarantee does not cover such uses. Some chemical ingredients and additives in such drinks / beverages may also attack and damage water tank material.
•Only use clean pure drinking water.
•Capacity of water dispenser tank is 2.2 litres [3.8 pints], do not overfill.
•Push the water dispenser lever with a rigid cup. If you are using a plastic disposable cup, then push the lever with your fingers from behind the cup.
•Safety Lock is supplied for your convenience when filling the water tank and also to avoid small children tampering with the water dispenser. [See Page 8]
7
Cleaning the water tank
Remove the water tank, open the latches on both sides and detach the top cover mechanism from the water tank. Clean the water tank with warm clean water, reinstall the top cover mechanism and fasten the latches.
When installing the water tank, make sure that hooks behind it fits securely into the hangers on the door. Make sure that parts removed during cleaning (if any) are installed correctly into their original locations. Otherwise, water may leak.
Important:
Water tank and components of water dispenser are not
Water tray
Water that drips while using the water dispenser accumulates in the drip tray. Remove the drip tray by pulling it towards yourself and empty it from time to time.
Remove the plastic drainer part as shown in the diagram by pressing down on the edge.
Remove the water valve from the water tank as shown in the diagram. When
Safety lock for Water Dispenser
You may use the lock in order to avoid small children tampering with the water dispenser. To do this, slide the locking latch from left to right as illustrated in the figure. You must slide the latch back to left position in order to use the water dispenser.
To avoid accidental water dispensing, we recommend
you to lock the water dispenser. | 8 |
UNLOCK LOCK
