INSTALLATION INSTRUCTIONS 1.Fitted the two plastic wall spacers
supplied onto the condenser at the back of the appliance by rotating 1/4 turn.
2.Locate the appliance on a smooth surface.
3.To ensure it is standing upright adjust the two front feet by turning clockwise or
Plug receptacle |
4.A special receptacle is supplied to store the mains plug during transit. The receptacle is fixed at the back of the cabinet on the side of the compressor. Gently remove the plug from the receptacle. Never pull the mains cord, you may damage the appliance. In case of transportation, ensure you locate the
plug in the receptacle provided to avoid transit damage.
5.The space in the room where the appliance is installed must
not be smaller than 10 cubic metres. 6.Fit the front grille supplied with your
appliance as shown in the diagram.
8
EN