•Push the arm of the water dispenser with a rigid glass. If you are using disposable plastic glasses, push the arm with your fingers from behind the glass.
1 
2
1
Cleaning the water tank
Release the tank cover from the water tank by opening latches at both sides. Remove the water tank and clean with warm and clean water. Place the water tank to its seating, install the tank cover and close the latches.
3
Make sure that the parts removed (if any) during cleaning are properly attached to their original places. Otherwise, water leakage may occur.
Important:
Components of the water tank and water dispenser should not be washed in dishwasher.
Water tray
Water that dripped while using the water dispenser accumulates in the spillage tray. Take out the spillage tray by pulling it towards yourself and empty it regularly.
Take out the plastic strainer by pressing it on sides.
Take the water valve out of the water tank. When replacing it, make sure that
the seal is in place.
Maximum height of glass suitable for use with Stored Water Dispenser is 16 cm which includes most of the “Standard” pint glasses.
19
EN
