Beko CN111520 manual Water connection, Connecting the water hose to the refrigerator

Water connection

Depending on the model of the refrigerator, you can connect it either to a demijohn or water mains.

First you must connect the water hose to the refrigerator.

In cases where a demijohn is used, a separate pump must also be used.

WARNING: Refrigerator and the pump, if any, must be unplugged during connection.

Following parts may not be supplied with your product since they are not required when using a demijohn.

Check that following parts have been delivered together with the product:

1.Union for connecting the water hose to the rear of the refrigerator

2.3pieces of pipe clips (used to secure the water hose)

3.5-meter long water hose (1/4 inch in diameter)

4.Cold mains water valve with mesh filter (tap adapter)

5.External water filter. (If there is a demijohn connection; it is not necessary to use a water filter.)

3	*5
4

2

1

Connecting the water hose to the refrigerator

1.Slip the union (b) onto the water hose (a).

2.Push the water hose downwards firmly to slip it onto the water inlet valve

(c).

3.Tighten the union (c) by hand to secure it onto the water inlet valve.

Normally, you are not required to tighten the union with a tool. However, you can use a spanner or pliers to tighten the union if there is a leakage.

a

a

b

2

1

c

10

EN