REPLACING THE INTERIOR LIGHT BULB
Should the light fail to work, proceed as follows.
1.Switch off at the socket outlet and pull out the mains plug.
• You may find it useful to remove shelves for easy access.
2.Use a flat tipped screwdriver to remove the light diffuser cover by inserting the blade in each of the two recesses to prise off each side.
3.First check that the bulb hasn’t worked loose by ensuring it is screwed securely in the holder. Replace the plug and switch on. If the bulb works, replace the light cover by inserting the rear lug and pushing up to locate the front two lugs.
4.If the light still fails to work, switch off at the socket outlet and pull out the mains plug. Replace the bulb with a new 15 watt (max) screw cap (SES) bulb.
5.Carefully dispose of the
12
EN
