12.Reposition left hand side feet on the opposite side.(10)
13.Unscrew and remove the upper door middle hinge pin bushing/ door stopper using a
15.Fit upper door left hand side middle hinge pin bushing/door stopper supplied in the plastic bag using cross- headed screwdriver.(13)
16.Reposition three small plastic plugs on the left hand side, which are covering middle hinge holes, on the opposite side to cover holes left empty. (14)
17.Locate and
18.Locate the middle hinge pin to middle hinge pin bushing of upper door on the left hand side and
19.Reposition the two screws fitted to lower hinge holes on the left hand side at the bottom of the cabinet on the opposite side.(17)
20.Unscrew and reposition the hinge housing and steel pant on the right hand side at the bottom of the door on the opposite side. (18)
21.Locate and
22.Carefully stand the appliance upright and adjust the two front feet if necessary.
23.Check that doors open and close easily, they are aligned correctly and that there are no gaps allowing air into the cabinet. If there are gaps between the door seal and the cabinet, adjust the door seal by gently pulling away from the door using fingers.
24.Check that all the hinge screws are tightened. Avoid over tightening the screws.
25.Put all items, fittings back in the appliance.
26.Fit upper door top trim plastic hinge cover. Upper door top trim hinge cover is supplied in the plastic bag.(21)
27.Wait for at least 4 hours to allow the system to settle before switching on.
28.Once the correct storage temperatures have been reached in the appliance, put back all the food.
11
EN
