GB

Instruction Manual

Electrical requirements

Before inserting the plug into the wall socket make sure that the voltage and the frequency shown in the rating plate inside the appliance corresponds to your electricity supply.

•Take care to ensure that the plug remains readily accessible. Do not use multiple adapter bar or extension cable.

Warning! This appliance must be earthed. Repairs to electrical equipment should only be performed by a qualified technician. Incorrect repairs carried out by an unqualified person carry risks that may have critical consequences for the user of the appliance.

Transportation instructions

1.The appliance should be transported only in upright position. The packing as supplied must be intact during transportation.

2.If during the course of transport the appliance, has been positioned horizontally, it must not be operated for at least 4 hours, to allow the system to settle.

3.Failure to comply with the above instructions could result in damage to the appliance, for which the manufacturer will not be liable for.

4.The appliance must be protected against rain, moisture and other atmospheric influences.

Important!

•Do not attempt to sit or stand on top of your appliance as it is not designed for such use. You could injure yourself or damage the appliance.

•Make sure that the mains cable is not caught under the appliance during and

after moving, as this could damage the cable.

•Do not allow children to play with the appliance or tamper with the controls.

Installation instructions

1.Do not keep your appliance in a room where the temperature is likely to fall below 10 ° C at night and/or especially in winter, as it is designed to operate in ambient temperatures between +10 and +43 ° C. At lower temperatures the appliance may not operate, resulting in a reduction in the storage life of the food.

2.Do not place the appliance near cookers or radiators or in direct sunlight, as this will cause extra strain on the appliance's functions. If installed next to a source of heat or freezer, maintain the following minimum side clearances:

From Cookers 30 mm From Radiators 300 mm From Freezers 25 mm

3.Make sure that sufficient room is provided around the appliance to ensure free air circulation.

• The lower air-circulation cover inside your refrigerator should be placed below the door, by facing the counter parts as seen in

(Fig. 2).

Be sure that the counter parts meshed completelly.

•For efficient functioning, there should be a gap of at least 5cm between the refrigerator and the wall. To ensure this, attach the two round buffers to be found inside the No Frost appliance, as shown in the illustration

(Fig. 3).

4.The appliance should be positioned on a smooth surface. The two front feet can be adjusted as required.To ensure that your appliance is standing upright adjust the two front feet by turning clockwise or anti-clockwise, until firm contact is secured with the floor. Correct adjustment of feet prevents excessive vibration and noise.

5.Refer to "Cleaning and Care" section to prepare your appliance for use.

2

Page 6 Page 8
Page 7
Image 7
Beko D 9432 NM, D 9470 NM, D 9433 manual Electrical requirements, Transportation instructions, Installation instructions
Page 6 Page 8

D 9433, D 9432 NM, D 9470 NM specifications

Beko has established itself as a leading appliance brand, offering innovative and reliable products tailored to modern households. Among its diverse range of washing machines, the Beko D 9470 NM, D 9432 NM, and D 9433 models stand out due to their advanced features, efficient technologies, and user-friendly characteristics.

The Beko D 9470 NM is a high-capacity washing machine with a generous 9 kg load capacity, making it ideal for larger families or individuals who prefer to do fewer but larger laundry loads. One of its standout features is the ProSmart Inverter Motor, which not only operates quietly but also contributes to energy efficiency. This model is engineered to reduce energy consumption, helping users save on their electricity bills while being environmentally friendly.

The D 9432 NM, on the other hand, offers a slightly smaller capacity of 8 kg and comes equipped with a variety of washing programs tailored for different fabric types. Its Aquawave drum design ensures gentle yet effective cleaning, providing optimal washing performance while protecting the fibers of the clothes. Additionally, this model features the Fast+ function, which reduces washing time without compromising on cleanliness, making it perfect for those with a busy lifestyle.

Meanwhile, the D 9433 model features a unique steam clean option that utilizes steam to sanitize and remove stubborn stains, providing a thorough cleanse while reducing wrinkles in garments. This feature is particularly beneficial for households looking to minimize ironing time. Similar to its counterparts, it also includes the ProSmart Inverter Motor, enhancing longevity and reducing noise levels.

All three models are designed with user convenience in mind. They include intuitive controls and LED displays that simplify operation, allowing users to select programs and monitor progress easily. Furthermore, the child lock feature ensures safety in households with young children.

In summary, the Beko D 9470 NM, D 9432 NM, and D 9433 washing machines exemplify a blend of capacity, efficiency, and advanced technologies, making them excellent choices for various laundry needs. With features focused on performance, energy savings, and user convenience, these models are poised to meet the demands of contemporary laundry while providing long-lasting reliability.
Top Page Image Contents