Electrical Connection, Electrical requirements

4Electrical Connection

Make sure that you have an earthed power outlet socket rated at 13 amps (minimum).

Attention!

If you use your dryer as built-in, the socket must be reachable after installation, or a separate switch (which can disconnect the two poles) must be used in the installation. Check for suitability.

For a permanent connection, a master switch with at least 3mm contact clearance and minumum 13 A rating must be used.

Electrical requirements

Before you insert the plug into the wall socket make sure that the voltage and the frequency shown in the rating label corresponds to your electricity supply. We recommend that this appliance be connected to the mains supply via a suitable switched and fused socket in a readily accessible position.

Should the mains lead of the appliance become damaged or need replacing at any time, it must be replaced by a special purpose made mains lead which can only be obtained from a Authorised Service Agent.

AWarning

This appliance must be earthed

If the fitted moulded plug is not suitable for your socket, then the plug should be cut off and an appropriate plug fitted.

The moulded plug on this appliance incorporates a 13A fuse. Should the fuse need to be replaced an ASTA approved BS1362 fuse of the same rating must be used. Do not forget to refit the fuse cover. In the event of losing the fuse cover, the plug must not be used until a replacement fuse cover has been fitted. Colour of the replacement fuse cover must be the same colour as that visible on the pin face of the plug. Fuse covers are available from any good electrical store.

In order to avoid hazards, damaged supply cord should be replaced by the manufacturer, its service agent or similarly qualified people.

Built-under installation

This appliance can be installed under a worktop.

AUndercounter installation without the top cover must only be carried out by an authorised agent.Risk of electric shock.

A Important

Fitting a different plug

As the colours of the wires in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals on your plug, proceed as follows:

1 Connect the green - yellow or green (earth) wire to the terminal in the plug marked ‘E’ or with the symbol or coloured green and yellow or green.

2 Connect the blue (neutral) wire to the terminal in the plug marked ‘N’ or coloured black.

3 Connect the brown (live) wire to the terminal in the plug marked ‘L’ or coloured red.

With the alternative plugs a 13A fuse must be fitted either in the plug or adaptor or in the main fuse box. If in doubt contact a qualified electrician.

Green and yellow

or green

	N	L
	Blue or black
		Brown or red

Washer/dryer combination

Do not stack washing machine on top of the tumble dryer. This would damage both appliances and guarantees would become void. It is also unsafe to stack an appliance on top of another without using a suitable and approved stacking kit obtained from the manufacturer of the appliances.

DCU 7230 specifications

The Beko DCU 7230 is a powerful and efficient condenser tumble dryer designed to meet the needs of modern households. Emphasizing performance and convenience, this appliance provides a reliable solution for drying clothes quickly and effectively.

One of the standout features of the Beko DCU 7230 is its large drum capacity of 7 kilograms, which is suitable for medium-sized families. This allows users to dry sizable loads of laundry in one go, saving both time and energy. The drum is made from durable materials that help protect delicate fabrics while ensuring even drying.

The dryer boasts a range of drying programs, enabling users to choose the best setting for each type of fabric. Options include cotton, synthetics, and delicate cycles, ensuring that garments are treated according to their specific requirements. Additionally, the DCU 7230 features a timed drying option, which allows users to set cycles according to their schedules.

One of the key technologies integrated into the Beko DCU 7230 is its sensor drying system. This innovative feature automatically detects the moisture level in the drum and adjusts the drying time accordingly. This not only prevents over-drying, which can lead to fabric damage but also enhances energy efficiency, saving users money on utility bills.

The machine is also equipped with a reverse action drum, which helps to reduce tangling and creasing of clothes. This feature allows for more thorough drying and makes ironing easier, providing added convenience in your laundry routine.

Furthermore, the Beko DCU 7230 is designed with user-friendliness in mind. Its clear LCD display provides easy navigation through settings, and the filter is accessible for quick cleaning, ensuring optimal performance.

Energy efficiency is another highlight of the DCU 7230, which is rated class B. This certification indicates a balance between performance and sustainability, making it an excellent choice for environmentally conscious consumers.

In summary, the Beko DCU 7230 condenser tumble dryer combines practicality, advanced technology, and energy efficiency. With features designed to accommodate various fabric types and an automatic drying system, it is an excellent appliance for those seeking a reliable and efficient drying solution.

Beko DCU 7230 Electrical Connection, Electrical requirements, This appliance must be earthed

Models: DCU 7230