Beko DPU 8360 W manual Under counter installation, Mounting over a washing machine

Models: DPU 8360 W

1 36
Download 36 pages 56.88 Kb
Page 10
Image 10

transportation safety assembly remains inside the drum.

Under counter installation

This product can be installed under a counter if the height of the counter is sufficient.

ANever operate the dryer without the top trim is in place.

Dryer Depth

60 cm

54 cm

 

 

 

Stock

 

 

number of

 

 

under-bench

2979600100

2973600100

installation

 

 

part

 

 

 

 

 

Leave at least 3 cm of space around the sides and the rear wall of the product when installing it under a counter or in a cupboard.

Mounting over a washing machine

A fixing device should be used between the two machines when installing the dryer above a washing machine. The fixing device can usually be obtained from a specialist retailer.

Total weight of the washing machine and the dryer -with full load- when they are placed on top of each other reaches to approx. 180 kilograms.

Place the products on a solid floor that has sufficient load carrying capacity!

Connecting to the drain

In products equipped with condenser unit, water accumulates in the water tank during the drying cycle. You should drain accumulated water after each drying cycle.

You can directly drain accumulated water through the water drain hose supplied with the product instead of periodically draining the water collected in the water tank.

Connecting the water drain hose

1.Pull hose in the product by hand in order to disconnect it from where it is connected. Do not use any tools to remove the hose.

2.Connect one end of the drain hose supplied separately with the product to the connection point from where you removed the hose of the product in previous step.

10

EN

Page 10
Image 10
Beko DPU 8360 W manual Under counter installation, Mounting over a washing machine, Connecting to the drain