Beko DRCS 68 W Quick instructions for daily use, Preparation and starting, Cancelling a programme

7Quick instructions for daily use

Preparation and starting

1.Press the “On/Off” button.

2.Place the laundry in the machine.

3.Select the programme.

4.Close the loading door.

5.Press “Start/Pause/Cancel” button.

Cancelling a programme

A new programme can be selected and started after “Programme cancel” is activated in order to change the drying programme.

In order to cancel the selected programme, press “Start/Pause/Cancel” button for about 3 seconds. The “Filter cleaning”, “Water tank” and “End/ Anti- creasing” warning LEDs will light up at the end of this period for reminding purposes.

Adding laundry

In order to add laundry after the start-up of the programme:

1.Press “Start/Pause/Cancel” button.

2.Open the loading door and put the laundry in.

3.Close the loading door.

4.Press “Start/Pause/Cancel” button to start the programme.

Changing the programme after the programme has started

You can use this feature after your machine has started to dry your clothes under higher or lower temperatures. Press and hold the “Start/Pause/Cancel” button for about 3 seconds to switch the machine into the “Cancel” status in order to change the programme. Change the programme and press “Start/Pause/ Cancel” button to start it.

After the programme is finished The “End/Anti-creasing” and “Filter cleaning” warning LEDs as well as “Water tank” warning LED in some models on the programme follow up indicator will light up when the programme comes to an end. The door can be opened and the machine becomes ready for a second cycle.

1.Press the “On/Off” button to shut down the machine.

2.Take out the laundry from the machine.

3.Check if there are any foreign substances in the machine.

4.Clean the filter after drying. Also drain the water tank in models equipped with a condenser.

20 - EN