Auxiliary function
Low temperature
This function allows for drying at lower temperatures and therefore saves energy.
Warning LED will light up when you select the function.
CYou must use this function when you
dry your synthetic or delicate laundry.
Warning indicators
CWarning indicators may differ according to the model of your
machine.
Filter cleaning
A warning LED will light up to remind filter cleaning after the programme finishes.
CIf the filter cleaning warning LED lights up continuously, please refer to,
“Solution suggestions for problems”.
Starting the Programme
1.Press “Start/Pause/Cancel” button to start the programme.
2.“Start/Pause/Cancel” button will light up to indicate that the programme has started.
Timer follow-up indicator
One of the LED lights will remain on as far as programme runs and shows the approximate remaining time.
CLEDs on the timer
Changing the programme after the programme has started
You can use this feature to dry your laundry in a different programme after your machine has started to run.
For example;
Press and hold the “Start/Pause/Cancel” button for about 3 seconds to select “80” minutes programme instead of “60” minutes programme
Select the “80” minutes programme by rotating the program knob.
Press “Start/Pause/Cancel” button to start the programme.
CThe programme which is selected first will go on even if the programme selection button is moved and another programme mode is selected while the machine is operating. You must cancel
16
the ongoing programme in order to change the drying programme. (See, Ending the program through canceling)
Adding/removing laundry in standby mode
In order to add or take out laundry after the
1.Press the “Start/Pause/Cancel” button to switch the machine to “Pause” mode. Drying process will stop.
2.Open the door at Pause position and close it again after adding or taking out laundry.
3.Press “Start/Pause/Cancel” button to start the programme.
CAny laundry added after the drying process was started may cause the already dried clothes in the machine intermingle with wet cloth es and the result will be wet laundry after the drying process is over.
C Laundry may be added or taken out as much as desired during a drying process, but as this process will interrupt drying continuously, it will extend the programme
duration and increase energy consumption. Therefore, it is recommended to add laundry before the drying programme is started.
Child-proof lock
There is a childproof lock to prevent any programme interruption due to the pressing of keys while the program is on. The loading door and all keys except the “On/Off” key on the panel are deactivated when the
In order to activate the childproof lock, press the “Start/Pause/Cancel” and “Low temperature” buttons simultaneously for 3 seconds.
EN
