9Solution suggestions for problems

Problem

Cause

Explanation / Suggestion

Drying process

The filter might have not been

* Meshes of the filter may be clogged.

takes too much

cleaned.

Wash with water.

time.

 

 

 

 

 

Laundry comes

* The filter might have not been

* Meshes of the filter may be clogged.

cleaned.

out wet at the end

Wash with water.

* Excessive laundry might have been

of drying.

* Do not overload the machine.

loaded in.

 

 

 

* It might have not been plugged in.

 

 

* The loading door may be ajar.

* Make sure that the machine is plugged in.

Machine does not

* Programme might have not been set

* Make sure that the loading door is

switch on or the

or the «Start/Pause/Cancel» button

properly closed.

programme does

might have not been pressed.

* Make sure that the programme has been

not start. Machine

* «Childproof lock» might have been

set and it is not in “Pause” mode.

is not activated

activated.

* Deactivate the childproof lock.

when set.

* The condenser cover on the models

* Make sure that the condenser cover and

 

with a condenser might not be closed

the red lock is closed securely.

 

securely.

 

Programme has

 

* Make sure that the loading door is

* The loading door may be ajar.

properly closed.

been interrupted

* Electricity may be cut off.

* Press «Start/Pause/Cancel» button to

without any cause.

 

 

start the programme.

 

 

* Dry only the laundry which is suitable for

Laundry has

 

drying in your machine after checking the

shrunk, become

* A programme suitable for the laundry

labels on your clothes.

felted or

type might have not been used.

* Select a programme with suitable low

deteriorated.

 

temperature for the laundry type to dry your

 

 

clothes.

Drum light does

 

 

not come on.

* The machine might have not been

* Make sure that the machine is On.

(for models

started by using the On/Off button.

* Call the authorized service to replace the

equipped with a

* Bulb may have blown.

bulb.

lamp)

 

 

0 / Anti-creasing”

* The 2-hour anti creasing programme

* Turn off the machine and take out the

to prevent laundry from creasing might

LED flashes.

have been activated.

laundry.

 

 

0/ Anti-creasing”

* Programme has come to an end.

* Turn off the machine and take out the

LED is on.

laundry.

 

 

 

 

“Filter cleaning”

* Filter might have not been cleaned.

* Clean the cover filter.

LED flashes.

 

 

 

 

 

A Call an authorised service agent if the problem persists.

20 EN

Page 20
Image 20
Beko DRVT 61 W manual Solution suggestions for problems