If you want to change the programme or functions while the Time Delay function is enabled, then pause the machine by pressing the Start / Pause
/Cancel button. You will see that the countdown stops. The Time Delay indicator 
will start flashing. Select the new programme and/or add the functions as described in Programme
Selection and Table of Average Consumption Values. Resume the delayed start countdown by pressing the Start / Pause / Cancel button.
If you want to cancel delayed start countdown while it is in progress, then press the Start / Pause / Cancel button for three seconds. Release the button when 
symbols start flashing in the display. For a couple of minutes the machine will fulfill the necessary operations required for cancellation. Remaining time indicator displays “0:00”. You may select and operate a new programme following the delayed start countdown cancellation process.
If you want to select a new delayed start time while the delayed start countdown is in progress, then pause the machine by pressing the Start / Pause / Cancel button. Set the desired time by pressing the Time Delay Button. Start the countdown for the new time by pressing the Start / Pause / Cancel button again.
Salt Indicator
Please check the salt indicator on the display to see whether there is enough softening salt in your machine or not. You need to refill the powder dispenser whenever the salt warning indicator light lights.
25
WARNING:
If the water hardness level is stored as (r1), salt indicator will never come on even if the salt container is empty. (Adjusting the water hardness level is explained in Water Softening System section.)
Rinse Aid Indicator
Check the rinse aid warning display on the screen to find out if there is sufficient amount of rinse aid in your machine. You must refill the rinse aid container when the rinse aid indicator comes on.
WARNING:
If the Rinse Aid Indicator is set to (OFF), rinse aid indicator will never come on even if the rinse aid container is empty.
Rinse Aid Indicator Setting
•When your machine is switched off, press Half Load 
button and then On / Off button to switch it on.
•Hold Half Load 
button pressed and release On / Off button.
•Keep Half Load 
button pressed for three seconds more.
•Rinse Aid Indicator comes on and the stored rinse aid indicator status of your machine appears on the display in the format of “ON” or “OFF”.
•You can change the status of the indicator as “ON” or “OFF” with Start / Pause / Cancel button. If you switch off the machine with “On/Off” button when the status is “ON”, then the rinse aid indicator will come on when the rinse aid level in your machine becomes low while the machine is in use.
GB
