If the hardness of the water you use is more than 80°dF (French Hardness) or if you are using pit water, we recommend that you use filters and purifiers.
*If your tap water is below 9F (French hardness), you do not need to use special dishwasher salt in your machine. In this case, salt indicator light will be on continuously.
•Open the door of the machine
•Press programme selection button when machine is switched off.
•Keep programme selection button pressed and press on/off button to turn your machine on. Do not release the programme selection button until the defined “Water Hardness Level Indicator” of your machine is displayed ( See Water Hardness Level Adjustment Table )
Programme
•To adjust new Water Hardness Level: adjust the water hardness level according to the “Water Hardness Level Adjustment Table” ( See Water Hardness Level Adjustment Table ) by pressing the programme selection button again.
��������������������
�������� | ������ | ������ | ������� |
|
|
|
����� | ������� | ������� | �������� | ������������������������ | ||
| ��� | ��� | �� |
|
|
|
| ��� | ��� | ��� | ��������������������������������������������� |
|
|
������� |
| |||||
|
|
|
| ������������� |
|
|
|
|
|
|
|
|
|
| ���� | ���� | ����� | ���������������������������������������������� | ||
������� | ������������� | |||||
|
|
|
| |||
|
|
|
|
|
|
|
| ����� | ����� | ����� | ��������������������������������������������� | ||
������� | ������������� | |||||
|
|
|
| |||
|
|
|
|
|
|
|
| ����� | ����� | ����� | ������������������������������������������������� | ||
������� | ���������������������������� | |||||
|
|
|
|
|
|
|
������� | ����� | ����� | ����� | �������������������������������������������������� | ||
|
|
|
| |||
|
|
|
| ���������������������������� | ||
| ����� | ����� | ����� | |||
������� |
|
|
| |||
|
|
|
|
|
|
|
•If you select a water hardness level other than stored in the memory, programme follow up indicators flash with an interval of 1 second. The selected water hardness level in indicated by the Programme Selection indicators.
•Press “Start/Pause/Cancel” button once to store the level you have selected. Programme
•Press the on/off button to turn off your machine.
!If you move your house, it is very important to make the water hardness level adjustment of your machine according to the new location you move in order to preserve the washing efficiency.
12
GB
