Rinse aid
Use only rinse aid intended for household dishwashers.
The rinse aid is specially formulated to be used in the dishwashers for the prevention of watermarks and scale on dishes and to increase the efficiency of the washing and drying processes. Therefore, make sure that
there is adequate amount of rinse aid in the rinse aid dispenser of your machine.
Filling the rinse aid dispenser
Open the rinse aid dispenser lid by pressing the button as shown in the diagram.
Fill up with rinse aid until the container is full to level of ’max’ mark .
Put the lid (E) on and ensure you hear the clicking sound.
Remember to CLOSE the lid after every refill.
Make sure you clean any rinse aid that you might have spilled.
����������������
You can adjust the amount of rinse aid used during the wash programme by turning the rinse aid dispenser regulator (C).
The dispenser regulator (C) may be set between levels 1 and 6 (6 being the maximum amount of rinse aid usage). Your machine is
According to the finish and drying results obtained, adjust the dose of rinse aid by means of the six position selector. (Position 1: minimum dose, Position 6: maximum dose.) Gradually increase the dose if there are drops of water or lime spots on the dishes after washing. Reduce it if there are sticky whitish streaks on the dishes.
��������������������������� |
��������������������� |
17
GB
