Getting started
Remove your Television carefully from the box. You may wish to store the packaging for future use.
In the box
Inside your this package you should have:
¥Television
¥Remote control
¥User guide
¥AAA batteries x 2
4 | Read these instructions before use. |
Aerial connection
To connect an aerial, plug the aerial lead into the aerial socket on the rear of the TV.
Please Note
When not in use disconnect the plug from the mains power supply.
Press the Power button on the front of the TV. The standby indicator will
7illuminate.
Press a Numeric button or the Program up or Program down
button on the remote handset or Program up or Program down button on the front panel to switch the TV on.
The standby indicator remains on. The picture will appear after a few seconds.
Press the Standby button to switch the TV to standby. The standby indicator will brighter.
Please Note
Do not leave the television on standby unattended or overnight.
Switching the TV on for the first time
You can use an outdoor or indoor aerial.
However, if you use an indoor aerial the quality of the reception may be reduced and adjustment of the aerial may be required when changing programs.
Please note
If you live in a poor reception area or use an indoor aerial you may experience loss or corruption of teletext transmissions.
To install your TV, please read the sections
TV controls and Tuning the television.
Battery fitting
Insert the 2 AAA Batteries supplied into the compartment on the rear of the remote control, ensure you follow the polarity diagram inside the compartment.
Switching on
Mains power
Connect the mains plug into the mains socket and switch on.
Connect the TV mains plug into your domestic mains socket outlet (230 V 50 Hz AC).
