Beko LG-BKE 9300 D owner manual NameandFunction-RemoteControl, Operating Instructions

Operating Instructions

NameandFunction-Remote Control

1.Signal Transmitter

•Transmits the signals to the floor standing type air conditioner

2.Operation Display of the Remote Control

3.Indoor Fan Speed Selection Button

•To select the desired fan speed in two steps [Low, Mid]

4.Cooling ON Button

5.Temperature Setting Buttons

6.Power ON/OFF Button

•Operation will start when this button is pressed, and stop when the button is pressed again.

7.Auto Airfloor Direction Control Button

•The horizontal louvers swing up and down.

8.Auto Airflow Direction Control Button

•The vertical louvers swing left and right.

9.Heating Button (Heat Pump Model)

10.Plasma Air purifying Button

11.Timer Set Button

•Each time the button is pressed, the mode is changed in the following process. Time set (1, 2, 3, 4, 5, 6, 7 hours)

If you select "0" the off Timer function will be cancelled.

12.Soft Dry Operation Button

13.JET Cool Operation Button

(If you select JET Cool Operation Button, display shows "Po")

14.Auto Air Flow Operation Button(No application)

15.Electric Heater On/Off Button (Heat pump & Heater Model only)

Wireless Remote Control Puts all functions at your fingertips

Handling the remote control

•Aim at the signal receptor on the floor standing type air conditioner when operating.

•The remote control signal can be received at a distance of up to about 7meters.

•Be sure that there are no obstructions between the remote control and the signal receptor.

•Do not drop or throw the remote control.

•Do not place the remote control in a location exposed to direct sunlight, or next to a heating unit, or other heat source.

12Floor Standing-Type Air Conditioner