Installation Instructions
1.The space in the room where the appliance is installed must not be smaller than 10 cubic metres.
2.This appliance has been designed to operate in ambient temperatures up to 32 degrees C (90 degrees F) and is equipped with Advanced Electronic Temperature Control System [AETCS] which ensures that at the advised setting [4 - four on the] the frozen food in the freezer will not defrost even if the ambient temperature falls as low as
If the ambient temperature is below 0°C, the food in the fridge compartment will freeze. So, we recommend you don’t use the fridge compartment in such low ambient conditions. You can continue using the freezer compartment as usual.
3.Do not place the appliance near cookers, radiators or in direct sunlight as this will cause your appliance
to work less efficiently. If installed next to a source of heat or freezer, maintain the following minimum side clearances:
From Cookers 50 mm (2”) From Radiators 300 mm (12”) From Freezers 25 mm (1”)
4.See pages 16 to 23 for detailed Installation Instructions including reversing door opening direction.
5.Refer to cleaning and care section to prepare your appliance for use.
6.A special receptacle is supplied to store the mains plug during transit.
The receptacle is fixed at the back of the cabinet, on the side of the compressor.
(See diagram) Gently remove the plug from the receptacle. Never pull the mains cord, you may damage the
appliance. In the case of transportation, ensure you locate the plug in the receptacle provided to avoid transit damage.
10
EN
