3Installation
BPlease remember that the manufacturer shall not be held liable if the information given in the instruction manual is not observed.
Points to take notice of when relocating your refrigerator
1.Your refrigerator should be unplugged.Before transportation of your refrigerator, it should be emptied and cleaned.
2.Before it is
3.Original packaging and foam
materials should be kept for future transportation or moving.
Before you start the refrigerator,
Check the following before you start to use your refrigerator:
1.Clean the interior of the refrigerator as recommended in the “Maintenance and cleaning” section.
2.Connect the plug of the refrigerator to the wall socket. When the fridge door is opened, fridge internal lamp will turn on.
3.When the compressor starts to operate, a sound will be heard. The liquid and gases sealed within the refrigeration system may also give rise to noise, even if the compressor is not running and this is quite normal.
4.Front edges of the refrigerator may feel warm. This is normal. These areas are designed to be warm to avoid condensation.
5.Electrical connection
Connect your product to a grounded socket which is being protected by a fuse with the appropriate capacity.
Important:
The connection must be in compliance with national regulations.
•The power plug must be easily accessible after installation.
•Electrical safety of your refrigerator can only be guaranteed if the earthing system in your house complies with standards.
•The voltage stated on the label located at left inner side of your product should be equal to your network voltage.
•Extension cables and multi plugs must not be used for connection.
B A damaged power cable must be replaced by a qualified electrician.
B Faulty product must not be operated until it is repaired! There is the risk of electric shock!
7
EN
