3

Installation

 

 

 

 

 

 

B

Please remember that the

 

 

 

 

 

 

 

manufacturer shall not be held liable if

 

 

 

 

 

 

 

the information given in the instruction

 

 

 

 

 

 

 

manual is not observed.

 

 

 

 

 

 

Points to be considered

 

 

 

 

 

 

when re-transporting your

 

 

 

 

 

 

refrigerator

 

 

 

 

 

 

1. Your refrigerator must be

 

 

 

 

 

 

 

emptied and cleaned prior to any

 

 

 

 

 

 

 

transportation.

 

 

 

 

 

 

 

3.

Clean the interior of the refrigerator as

 

2. Shelves, accessories, crisper and etc.

 

 

in your refrigerator must be fastened

 

 

recommended in the “Maintenance

 

 

securely by adhesive tape against any

 

 

and cleaning” section.

 

 

jolt before repackaging.

4.

Plug the refrigerator into the wall

 

3. Packaging must be tied with thick

 

 

outlet. When the fridge door is open

 

 

tapes and strong ropes and the

 

 

the fridge compartment interior light

 

 

rules of transportation printed on the

 

 

will come on.

 

 

package must be followed.

5.

You will hear a noise as the

 

Please do not forget…

 

 

compressor starts up. The liquid and

 

Every recycled material is an

 

 

gases sealed within the refrigeration

 

indispensable source for the nature

 

 

system may also give rise to noise,

 

and for our national resources.

 

 

even if the compressor is not running

 

If you wish to contribute to recycling

 

 

and this is quite normal.

 

the packaging materials, you can

6.

Front edges of the refrigerator may

 

get further information from the

 

 

feel warm. This is normal. These

 

environmental bodies or local

 

 

areas are designed to be warm to

 

authorities.

 

 

avoid condensation.

 

Before operating your

Electric connection

 

Connect your product to a grounded

 

refrigerator

 

Before starting to use your refrigerator

socket which is being protected by a

 

fuse with the appropriate capacity.

 

check the following:

 

Important:

 

1. Is the interior of the refrigerator dry

 

The connection must be in

 

 

and can the air circulate freely in the

 

 

 

 

compliance with national regulations.

 

 

rear of it?

 

 

 

 

The power cable plug must be easily

 

2. You can install the 2 plastic wedges

 

 

 

accessible after installation.

 

 

as illustrated in the figure. Plastic

 

 

 

 

The specified voltage must be equal

 

 

wedges will provide the required

 

 

 

 

to your mains voltage.

 

 

distance between your refrigerator

 

 

 

 

Extension cables and multiway plugs

 

 

and the wall in order to allow the air

circulation. (The illustrated figure is

must not be used for connection.

 

only an example and does not match

 

exactly with your product.)

 

7

EN

Page 8
Image 8
Beko UR483APW manual Installation, Before operating your Electric connection, Please do not forget…