3.Attach the plastic covers supplied in the User Manual bag into the holes on the rear panel. (P)

C Keep the transportation safety bolts in a safe place to reuse when the washing machine needs to be moved again in the future.

C Never move the product without the transportation safety bolts properly fixed in place!

Connecting water supply

C The water supply pressure required to run the product is between 1 to 10 bars (0.1 – 10 MPa). It is necessary to have 10 – 80 liters of water flowing from the fully open tap in one minute to have your machine run smoothly. Attach a pressure reducing valve if water pressure is higher.

C If you are going to use the double water-inlet product as a single (cold) water-inlet unit, you must install the supplied stopper to the hot water valve before operating the product. (Applies for the products supplied with a blind stopper group.)

C If you want to use both water inlets of the product, connect the hot water hose after removing the stopper and gasket group from the hot water valve. (Applies for the products supplied with a blind stopper group.)

AModels with a single water inlet should not be connected to the hot water tap. In such a case the laundry will get damaged or the product will switch to protection mode and will not operate.

ADo not use old or used water inlet hoses on the new product. It may cause stains on your laundry.

1.Connect the special hoses supplied with the product to the water inlets on the product. Red hose (left) (max.

90 ºC) is for hot water inlet, blue hose (right) (max. 25 ºC) is for cold water inlet.

AEnsure that the cold and hot water connections are made correctly when installing the product. Otherwise, your laundry will come out hot at the end of the washing process and wear out.

2.Tighten all hose nuts by hand. Never use a wrench when tightening the nuts.

3.Open the taps completely after making the hose connection to check for water leaks at the connection points. If any leaks occur, turn off the tap and remove the nut. Retighten the nut carefully after checking the seal. To prevent water leakages and damages caused by them, keep the taps closed when the machine is not in use.

Connecting to the drain

•The end of the drain hose must be directly connected to the wastewater drain or to the washbasin.

AYour house will be flooded if the hose comes out of its housing during water discharge. Moreover, there is risk of scalding due to high washing temperatures! To prevent such situations and to ensure smooth water intake and discharge of the machine, fix the end of the discharge hose tightly so that it cannot come out.

•The hose should be attached to a height of at least 40 cm, and 100 cm at most.

9

EN

Page 8 Page 10
Page 9
Image 9
Beko WM 6103 W manual Connecting water supply, Connecting to the drain
Page 8 Page 10

WM 6103 W specifications

The Beko WM 6103 W is a front-loading washing machine that combines efficiency, practicality, and modern technology. Designed with the user in mind, this model offers a range of features that make laundry days more manageable and less time-consuming.

One of the standout characteristics of the Beko WM 6103 W is its impressive 6 kg capacity, which is suitable for smaller households. It can handle a variety of loads, from everyday garments to specialized fabrics, making it versatile enough for different laundry needs. The machine boasts a spin speed of 1000 RPM, which ensures effective water extraction, leading to reduced drying times.

Energy efficiency is another key feature of the Beko WM 6103 W. It retains an A+++ energy rating, indicating low energy consumption without compromising performance. This efficiency translates to cost savings on energy bills and a reduced environmental footprint, making it an eco-friendly choice for conscious consumers.

Equipped with a range of wash programs, the Beko WM 6103 W caters to various fabric types and soil levels. The machine includes specialized cycles such as the Cotton, Synthetics, and Delicates programs, allowing users to select the most suitable option for their laundry. Additionally, the Quick Program enables users to wash lightly soiled clothes in just 30 minutes, a feature that adds convenience to busy lifestyles.

The Beko WM 6103 W also incorporates innovative technologies to enhance the washing process. The AquaWave system features specially designed drum movements that create a wave-like effect, providing gentle yet efficient cleaning. This system ensures clothes are treated with care while achieving high-quality washing results.

Furthermore, the machine is designed with user-friendly controls. The intuitive dial and LED display allow for easy navigation through the settings and programs, enabling users to select their desired options effortlessly. Safety features, such as the child lock and overflow prevention system, add an extra layer of security for family households.

In conclusion, the Beko WM 6103 W is a practical and efficient washing machine that combines various features and technologies to meet the demands of modern living. With its user-friendly design, eco-friendly performance, and effective washing capabilities, it is a reliable choice for those seeking a dependable appliance to simplify their laundry routine.
Top Page Image Contents