Connecting to the water supply.

Important:

•The water supply pressure required to run the machine must be 1-10 bar (0,1 – 1 MPa). (Practically, it is necessary to have 10 – 80 liters of water flowing from the tap in one minute to have your machine run smoothly.) Attach a pressure- reducing valve if the water pressure is higher.

•Connect the special hose supplied with the machine to the water intake valves on the machine.

•In order to prevent water leakage that may occur at the connection points, there are rubber seals (4 seals for the models with double water inlet and

2 seals for other models) attached to the hoses. These seals should be used at the tap and machine connection ends of the hoses. The plain end of the hose fitted with a filter must be attached to the tap and the elbowed end must be attached to the machine. Tighten the nuts of the hose well by hand; never use wrenches to tighten the nuts.

•Open the taps completely after making the hose connection to check if there is any water leakage at the connection points. Turn off the tap and remove the nut in case of any leakage. Retighten the nut carefully

after checking the seal. To prevent any water leakage and any other damage to be caused by it, keep the taps closed when the machine is not in use.

•Models with a single water inlet should not be connected to the hot water tap. Laundry may be damaged or the appliance may switch to protection mode and not work.

When returning the appliance to its place after maintenance or cleaning, care should be taken not to fold, squeeze or block the hoses.

Connecting to the drain

The water discharge hose can be attached to the edge of a washbasin or waste water system. The drain hose should be firmly fitted into the drain as to not loosen in its housing.

Important:

•The end of the drain hose can be directly connected to the wastewater drain or to the washbasin. The fitting must be secured in all types of connections. Your house may be flooded if the hose falls out of its housing during water discharging.

•The hose should be attached to a height of at least 40 cm, and 100 cm at most.

•In case the hose is elevated after laying it on the floor level or close to the ground (less than

40 cm above the ground), water discharge becomes more difficult and the laundry may come out wet. Therefore, the heights described in the figure should be followed.

•To prevent dirty water refilling the

10

EN

Page 9 Page 11
Page 10
Image 10
Beko WM 6123 S, WM 6103 W manual Connecting to the water supply, Connecting to the drain
Page 9 Page 11

WM 6123 S, WM 6103 W specifications

The Beko WM 6103 W is a front-loading washing machine that combines efficiency, practicality, and modern technology. Designed with the user in mind, this model offers a range of features that make laundry days more manageable and less time-consuming.

One of the standout characteristics of the Beko WM 6103 W is its impressive 6 kg capacity, which is suitable for smaller households. It can handle a variety of loads, from everyday garments to specialized fabrics, making it versatile enough for different laundry needs. The machine boasts a spin speed of 1000 RPM, which ensures effective water extraction, leading to reduced drying times.

Energy efficiency is another key feature of the Beko WM 6103 W. It retains an A+++ energy rating, indicating low energy consumption without compromising performance. This efficiency translates to cost savings on energy bills and a reduced environmental footprint, making it an eco-friendly choice for conscious consumers.

Equipped with a range of wash programs, the Beko WM 6103 W caters to various fabric types and soil levels. The machine includes specialized cycles such as the Cotton, Synthetics, and Delicates programs, allowing users to select the most suitable option for their laundry. Additionally, the Quick Program enables users to wash lightly soiled clothes in just 30 minutes, a feature that adds convenience to busy lifestyles.

The Beko WM 6103 W also incorporates innovative technologies to enhance the washing process. The AquaWave system features specially designed drum movements that create a wave-like effect, providing gentle yet efficient cleaning. This system ensures clothes are treated with care while achieving high-quality washing results.

Furthermore, the machine is designed with user-friendly controls. The intuitive dial and LED display allow for easy navigation through the settings and programs, enabling users to select their desired options effortlessly. Safety features, such as the child lock and overflow prevention system, add an extra layer of security for family households.

In conclusion, the Beko WM 6103 W is a practical and efficient washing machine that combines various features and technologies to meet the demands of modern living. With its user-friendly design, eco-friendly performance, and effective washing capabilities, it is a reliable choice for those seeking a dependable appliance to simplify their laundry routine.
Top Page Image Contents