Belkin AP30800fc10-BLK To Silence Audible Alarm, Connect Audio Video Coaxial Cable, Installation

Belkin PureAV Battery Backup

Installation

To Silence Audible Alarm

There are two ways to disable the audible alarm:

1.Set the Alert Sound ON/OFF Switch to the OFF position. When in the OFF position, the audible alarm will not sound when the Belkin PureAV Battery Backup is in the backup mode.

2.While the Battery Backup is in battery-backup mode, push the “ON/ OFF/TEST” button less than 1.5 seconds to silence the audible alarm. (This does not work if the Belkin PureAV Battery Backup is under low- battery or overload condition.)

All equipment must be turned off prior to hardware installation.

Connect Audio Video Coaxial Cable

Connect a modular coaxial cable between the cable wall outlet and the surge protector jack marked “IN”. Connect another coaxial cable between the surge protector jack marked “OUT” and the cable equipment or cable modem being protected.

*All equipment must be turned off prior to hardware installation.

7