Introduction
This booklet is a Quick Installation Guide through the basic steps needed to install the OmniView Universal PS/2 Adapter.
Package Contents
•OmniView Universal PS/2 Adapter
•Sun 13W3 Video Cable
•DIN8 Cable
•USB, VGA Cable Kit
•Quick Installation Guide
Product Benefits
•Converts Sun DIN8 and USB to PS2
•Converts Sun 13W3 video to HDDB15 SVGA
•Supports special Sun commands
•Does not require power
•Requires no software
•Emulates keyboard and mouse signals
•Supports Belkin ENTERPRISE Series KVM Switches
•Comes with the Belkin
Technical Specifications
Part Number: | F1DE083 |
Keyboard & Mouse Input: | MiniDIN8, USB |
Keyboard & Mouse Output: | PS/2 |
Video Input: | VGA, 13W3 |
Video Output: | VGA |
Enclosure: | |
Width: | 3 1⁄4" |
Height: | 1" |
Depth: | 3 1⁄2" |
Weight: | 3.5 oz. |
Hardware Supported: | Sun & Mac® |
Note: Specifications are subject to change without notice.
| PS/2 Green | PS/2 Purple |
Video Port | Console Port | Console Port |
MiniDIN8 Port | USB Port | VGA Port |
Installation: Step 1
Follow these steps if you are using a USB computer system
1.Shut down your computer. Take the included VGA cable and connect the male end of the cable to the VGA port on the back of the computer. Connect the female end of the VGA cable to the Adapter.
2.Take the included USB cable and connect it to the USB port on the back of the computer. Connect the other end of the USB cable to the Adapter.
Follow these steps if you are using a Legacy Sun system
1.Shut down your computer. Take the included 13W3 cable and connect the end of the cable to the 13W3 port on the back of the computer. Connect the other end of the cable to the VGA port on the Adapter.
2.Take the included miniDIN8 cable and connect it to the designated port on the back of the computer. Connect the other end of the miniDIN8 cable to the Adapter.
