12
Using the KVM Switch
To modify the hot-key preceding sequence from the default Scroll Lock, you can either hit the hot-key sequence: scrlk – scrlk – H – (y), y = SCROLL LOCK, CAPS, ESC,F12,LEFT_CTRL,RIGHT_CTRL,orNUMLOCK(asdetailedintheHot KeyQuick Reference Table below).orYou can use another method: Press and hold the last button to enter the hot-key setting mode. Step 1. Press and hold the last button (i.e., the second button on the 2-port model or the fourth button on the 4-port model) till you hear two beeps. Then release the button. Step 2. Within two seconds, you should hit any of the selectable hot-key triggers (y), y = SCROLL LOCK, CAPS, ESC, F12, LEFT_CTRL, RIGHT_CTRL, or NUMLOCK,tobeyourhot-keytrigger.For example, if you hit CAPS after hearing the two beeps, then the hot key will be: CAPS – CAPS – command key.For detailed hot-key sequences and their corresponding functional commands, please refer to the Hot Key Quick Reference Table below. Hot Key Quick Reference Table
2-/4-Port SOHO KVM Switch with Audio & Mic -- Operation Commands for Hot Keys/Front-Panel Buttons
Hot-key sequence = [ScrLk] + [ScrLk] + Command key(s)
* user-denable preceding sequence = SCROLL LOCK, CAPS, F12 or NUM LOCK, LEFT_CTRL, RIGHT_CTRL
Command Hot Keys1Front-Panel Buttons Description
Select Computer Channel 2
(Joint-select PC port/audio &
mic, if binding is enabled)
ScrLk + ScrLk + (x)
(x is a top-row number key)
x = 1~2 / x = 1~4 for PC
channel no.
Press the computer icon on the
left of a button to select the
active computer channel
Select the active computer channel
(Hot key: Joint-select PC port/audio & mic, if binding is enabled)
Select Audio & Mic Channel 2
(Joint-select PC port and audio
& mic, if binding is enabled)
ScrLk + ScrLk + (Fy)
Fy = F5~F6/Fx=F5~F8 (Fy is a
function key)
--
Select the active audio & mic channel
(Hot key: Joint-select PC and audio & mic channel, if binding
is enabled)
Bind Computer and
Audio & Mic Switching 2
[Default]
ScrLk + ScrLk + Q--
Enable the binding of PC port and audio & mic switching. (Hot
key: Once this feature is enabled, any computer and/or audio &
mic switching by hot keys is bound together) (factory default)
Unbind PC and
Audio & Mic Switching 2ScrLk + ScrLk + W-- Disable the binding of PC port and audio
& mic switching
Next lower PC channel 2
(Joint-select PC/audio & mic,
if binding is enabled)
ScrLk + ScrLk + (arrow up) -- Select the next lower connected PC channel
(Hot key: Joint-select PC/audio & mic, if binding is enabled)
Next higher PC channel 2
(Joint-select PC/audio & mic,
if binding is enabled)
ScrLk + ScrLk +
(arrow down) -- Select the next higher connected PC channel
(Hot key: Joint-select PC/audio & mic, if binding is enabled)
Previous PC channel ScrLk + ScrLk + Backspace -- Toggle between the previous channel and
current channel
Dene Hot-Key
Preceding Sequence
ScrLk + ScrLk + H + (y)
y = SCROLL LOCK, CAPS, ESC,
F12, NUM LOCK, LEFT_CTRL,
or RIGHT_CTRL
Press and hold down last button
(Button 2 / Button 4) until you
hear three beeps, release the
button, and then press (y) key.
This resets hot-key preceding
sequence to SCROLL LOCK.
Select the hot-key preceding sequence among 6 alternative keys
Read KVM
Firmware Version
Open Note Pad
ScrLk + ScrLk + V
--
Read the version of rmware that is currently on the KVM
Switch. This is helpful when a rmware upgrade is performed as
it gives you the ability to read the version of rmware, before and
after the upgrade, to ensure the rmware has installed correctly.