Knowing your Phone Adapter
|
| Connection to |
|
| Router |
Line 2 | Line 1 | DC Power |
5V/2.4A |
Reset
[a] | [b] | [c] | [d] |
[a]Line 2
[b]Line 1
[c]Connection to Router
[d]Reset
[e]Power
[e]
(a/b) Phone Ports
These ports are for connection to your telephone handset.. Use the RJ11 cable that was provided with the Phone Adapter to connect the telephone to these ports..
(c) Connection to Router
This port is for connection to your router.. Use the cable that was provided with the Phone Adapter to connect the router to this port.. Or you may use it to connect to your existing router setup..
(d) Reset Switch
The “Reset” button is used in rare cases when the Phone Adapter may function improperly.. Resetting the Phone Adapter will restore the Phone Adapter’s normal operation while maintaining the programmed settings.. You can also restore the factory default settings by using the “Reset” button.. Use the restore option in instances where you may have forgotten your custom password..
1. Resetting the Phone Adapter
Push and release the “Reset” button.. The lights on the Phone Adapter will momentarily flash while the unit reboots..
2. Restoring the Factory Defaults
Press and hold the “Reset” button for at least five seconds, then release it.. The lights on the Phone Adapter will momentarily flash
while the unit reboots..
