Belkin F5C412uk300W user manual Specifications, F5C412uk140W

To connect the Belkin 300-Watt Inverter directly to the 12-volt power source (battery), follow the steps as outlined below:

1.Push the adapter plug leading from the Inverter firmly into the Direct-Connect Cable socket.

2.Properly identify the positive (red) and negative (black) terminals on the 12-volt power source and make certain that the terminals are clean and dry.

3.Connect the RED alligator clip to the positive (+) terminal on the power source, and the BLACK alligator clip to the negative (-) terminal on the power source.

4.Plug your equipment or appliance into the AC receptacle on the Inverter.

5.Turn the Inverter’s power switch to the ON position.

6.Confirm that the LED power indicator light on the Inverter is glowing GREEN. This means the Inverter is “ready for action”.

7.Turn on the equipment or appliance.

Specifications

	F5C412uk140W	F5C412uk300W
Max.Continous Power	140 Watt	300 Watt
Surge efficiency (Peak)	300 Watt	500 Watt
No Load Current Draw	<0.1 Amps	<0.2 Amps
Waveform	Modified Sine Wave
Operating Input Voltage Range	11-15 volts DC
Output Voltage Range	AC 240V ±5%
Automatic Input Power Shutdown	≤10.4 Volts - ≥15 Volts
Output Frequency	50 Hz ±3Hz
Fuse (Amperes)	20 A	30 A
Space Fuse (Amperes)	20 A	30 A
Lenght	160 mm	160 mm
Width	90 mm	90 mm
Height	65 mm	65 mm
Weight	680 g	680 g
Class II product	yes	yes
Polarity	negative (-)	negative (-)
	to ground	to ground
Low battery alarm	10.4 Volt	10.4 Volt
Low battery shutdown	9.8 Volt	9.8 Volt