Hardware Setup | Belkin F5D4071 guide

Installing and Setting Up the Adapters

Hardware Setup	1

ardware Setup	2

3

4

1.Plug your network cable into the computer’s RJ45 network adapter port.

2.Plug the other end of your network cable into the RJ45 port located at the back of the Adapter. re Setup

3.Plug the power cable into the power connector at the back of the Adapter.

4.Plug the power plug of your power cable directly into a power outlet in the wall.

NOTE: Do not plug the device into a UPS or power strip with surge protection. The Adapter has its own power filter for protection against surges.

section

7

Image 9

Belkin F5D4071 user manual Hardware Setup

Contents

Powerline Turbo Ethernet Adapter Table of Contents Introduction Features Introduction Product Specifications Package Contents Powerline Link LEDEthernet Link LED System Requirements Installing and Setting Up the Adapters Running the InstallShield WizardOverview Installing and Setting Up the Adapters Installing and Setting Up the Adapters Hardware Setup Part 1 Diagnose a Local HomePlug Device Configuration Part 2 Diagnose a Network HomePlug Device Configuration Setting Up Security on a Local HomePlug Device Setting Up Security on a Network HomePlug Device Configuration Technical Support Diagnostics Information FCC StatementFederal Communications Commission Notice Information ModificationsEurope EU Declaration of Conformity Nome do fabricante declara que este tipo de equipamento está What is not covered by this warranty? What will we do to correct problems?How to get service What this warranty covers How state law relates to the warranty Information Belkin Tech Support Belkin B.VBelkin International, Inc