Belkin Docking Options
Belkin Docking Options
The Belkin Docking Ring
Belkin has designed the SOHO switches to link together with other Belkin networking products through the docking ring on the side of the module. The ring will fit into the mating ring of another Belkin network product such as a gateway router, a wireless access point. Simply place modules side by side and push them together.
The Belkin Wall Mount
Belkin provides an adapter that will allow the Switch to be mounted to the wall. The adapter is available at belkin.com. To install the wall mount follow these steps.
1.Use the wall mount as a template and mark the screw holes on your wall with a pencil.
2.Drill holes in the wall and insert screw anchors (not included) into the wall.
3.Insert screws into the anchors and turn them in just far enough that when the wall mount is placed on the screws it will be snug but still able to slide.
4.Snap the wall mount into the docking ring on the Belkin Switch.
5.Align the wall mount’s holes with the screw heads and push the wall mount over screws. Slide the Belkin Switch and wall mount down over the screw heads to secure it to the wall.
6
