Belkin F5D6130 Setting 64-bit Encryption, Setting 128-bit Encryption, Using MAC Address Filtering

Using the Belkin Wireless Access Point Manager

Setting 64-bit Encryption

1.Select 64-bit from the drop-down menu.

2.Select "Create with Passphrase".

3.Enter a passphrase and click "Apply".

4.Select the "Default Key ID" from the drop-down menu. These are labeled 1–4. Click "Apply".

64-bit encryption is now enabled in the WAP. Each wireless-equipped computer (client) that needs to communicate with the WAP must be set to the same encryption settings.

Setting 128-bit Encryption

1.Select 128-bit from the drop-down menu.

2.Select "Create with Passphrase".

3.Enter a passphrase and click "Apply".

128-bit encryption is now enabled in the WAP. Each wireless-equipped computer (client) that needs to communicate with the WAP must be set to the same encryption settings.

Using MAC Address Filtering

1.To set up the MAC filtering, click on "Command" and select "Set MAC Filter".

19