Using the Belkin Wireless LAN Monitor Utility
(c)In the “Transfer Rate” box, it is suggested that you leave this on “Automatic” unless there is a specific need to change this setting.
Click “Next” to continue.
(b)
(c)
3.The next screen allows you to input security encryption settings for the network. If the network is not encrypted, then leave the mode in “Off” and click “Complete.
If the network is encrypted, you will need to have the network key and key type (open or shared). This information is available from the network administrator or is the same as your wireless router or access point.
TIP: Most networks with WEP use “Open System” key type. For more detailed information go to the sector titled “Securing your Wireless Network” on page 26 of this manual.
(a)Select the Authentication Mode from the
(a)
1
2
3
4
5
6
7
8
section
19