Belkin F5D7231-4P IP Address, Subnet Mask, ISP Gateway Address, Alternate Setup Method, section

Alternate Setup Method

Setting your Internet Service Provider (ISP) Connection Type to Static IP

A static IP address connection type is less common than other connection types. If your ISP uses static IP addressing, you will need your IP address, subnet mask, and ISP gateway address. This information is available from your ISP or on the paperwork that your ISP left with you. Type in your information, then click “Apply Changes” (5). After you apply the changes, the Internet Status indicator will read “connection OK” if your Router is set up properly.

(1)

(2)

(3)

(4)

(5)

1.IP Address

Provided by your ISP. Enter your IP address here.

2.Subnet Mask

Provided by your ISP. Enter your subnet mask here.

3.ISP Gateway Address

Provided by your ISP. Enter the ISP gateway address here.

4.My ISP Provides More Than One Static IP Address

If your ISP assigns you more than one static IP address, your Router is capable of handling up to five static WAN IP addresses. Select “My ISP provides more than one static IP address” and enter your additional addresses.

1

2

3

4

5

6

7

8

9

10

11

12

13

section

43