Belkin F5D9630-4A Set Up, Belkin Tech Support, Start networking, Australia, 1800, New Zealand

Models: F5D9630-4A

1 2
Download 2 pages 7.86 Kb
Page 2
Image 2
Belkin Tech Support

ADSL2+ Modem with Wireless G+ MIMO Router

2.4The Setup Wizard will start automatically for express configuration (recommended) Click “Next” to continue.

2.5The first step is to select your country and ISP, and click “Next”. If your country and/or ISP is not listed, select “Other Country” or “Other ISP

2.6Now fill in the username and password you were supplied by your Internet Service Provider (ISP) in to the blank fields. It is important that the correct user name and password are entered otherwise the connection will fail. Your ISP will be able to confirm your user name and password.

Note: Belkin strongly recommends that you enable wireless security to WEP or WPA and change SSID to something of your own. Please read the User Manual for details on levels of wireless security and how to change your security settings.

3.2Double-check the settings shown on the following screen. You can click “Back” to change the settings. Or click “Next” to confirm.

3.3Now you have configured your modem router. Click on the OK button to apply the settings. After a period of about 2 minutes the connection with the Internet Service Provider will be established.

For latest software updates or if you have any further questions regarding installation of this product, please visit www.belkin. com/networking

Belkin Tech Support

Australia:

1800 235 546

New Zealand: 0800 235 546

Note: For more detailed instruction on other connection types, please refer

Note: You can always restart the Setup Wizard or use the Navigation Menu

to your User Manual.

on the left to change your setting.

 

Belkin Ltd.

7 Bowen Crescent, West Gosford NSW 2250, Australia

+61 (0) 2 4372 8600

+61 (0) 2 4372 8603 fax

3. Set Up

Set up your wireless LAN

3.1Now the Wireless LAN Setup screen will show. You can connect to the Router via a wireless-LAN-enabled computer with the following default wireless LAN settings:

SSID = Belkin G+ MIMO ADSL Wireless Channel = Auto Security = off

Start networking!

Congratulations! You have finished installing your new Belkin Router. Click “OK” to activate your settings. To test your Internet connection, open your browser and visit any website, such as www. belkin.com. For more detailed installation information, refer to your User Manual.

Belkin Corporation

501 West Walnut Street

Los Angeles, CA 90220, USA 310-898-1100

310-898-1111 fax

©2006 Belkin Corporation. All rights reserved. All trade names are registered trademarks of respective manufacturers listed.

P75126au

Page 2
Image 2
Belkin F5D9630-4A Set Up, Belkin Tech Support, Start networking, Australia, 1800, New Zealand, Set up your wireless LAN